EB10CF Hot Air Edge Bander
Item Number: EB10CF
| Most popular price point auto bander
for small shop sold in USA + Canadian
market since 1975.
for user references
Hot air automatic bench mount production
edge bander with top+ bottom motorized flush
trim station and power feeder
- No need for dust collector.
- No need for compressed air.
- Single Phase, 220 Volts, 20 A. 2850 W
- Top & Bottom motorized trim.
- The ends are cut automatically with
1/4" over hang. An end trimmer is
included to cut the ends flush manually
- Electronic Temp. control with range of :
0 - 900F ( 0 - 500 C )
- Board thickness range: 7/16" to 2-3/8 "
- Maximum tape thickness: 1 mm
- Remove the top+bottom trim station to
edgenband round shapes with radius
range of : 2-1/6" inner radius, and
unlimited outer radius
Factory mounted power feeder. The speed of this
feeder is variable. But we recommend 15 feet per
minute, and find out the right temperature for the
brand that you use.
The machine is packed in a crate with gross weight
of 120 pounds, and net weight of 95 Pounds
Dimensions: 24 x 37 x 17"
The front fence opens up to provide a wider table
easier to move the larger boards on the extended table
For the machine parts diagram and electrical drawings
For parts diagram for the trim station for EB10CF, click on:
For manual, please click on:
For some trouble shooting
manual, click on:
Most sections of EB10CF is similar to EB25
such as trim station and you can watch videos
on EB25 page.
Powered trimming station
Flush trim of top+bottom
of board simultaneously.
Electronic temperature regulation Remove the top+bottom trim
station to band curved pieces.