Door Hinge Router FR129M - no template required
Item Number: 2900595
Install Door Hinges without using any templates
Use the index scale bar to reference from the top
of the door. Open the coordiates based on length and width
of the hinge. Lock the coordinates. Drop the router to create
the space for the hinge. Use the reference scale to move the tool
to route the second and third openings.
Use the same reference index scale on the next door and save time
on re-indexing the location of the hinges on the next door.
Use the same index reference bar to route
the openig on the door frame. Move from one
door frame to another and save time on indexing set up
Use the corner chisel to sqaure the round edges in needed
Includes carrying case
FR129M enables you to make recesses for rectangular hinges without
using templates. The corner of the recesses will have radius of 1/4" for
1/2" bit, and 5/8" for 1-1/4" bit. For hinges with square corner, optional
accessory of 90º corner chisel item # 2945471 can be used.
110 V, 60Hz, 550 W, 30,000 RPM
Weighted Equivalent Acoustic Pressure Level: 84.5 dB A
Usual Level of Vibration (hand-Arm) < 2.5 m/S2
Chuck Diameter: 1/4"
Weight: 8.5 Lbs
Milling cutting shaft travel
In length: 5-11/16" or 145 mm
Sideways: 2-1/8" or 54 mm
Milling cutting shaft travel with bit ø 1-1/4"
In length: 6-15/16" or 176 mm
Sideways: 3-3/8" or 85 mm
Minimum opening between clamp vises
1-5/16" or 33mm
Maximum opening between clamp vises
8" or 203 mm
Cutter bit maximum diameter 1-1/4" or 32 mm
Maximum Milling Depth 7/16" or 11 mm
Watch a video
Watch another Video
For manuals (in 2 sections) click: